St Valentine Latex Mask - MADE TO ORDER

$195.00 $215.00

Do you sometimes need a skull, but like two of them, that are making out? I know how that feels.

This latex mask is cast from my unique sculpture in high quality thick latex and painted to make it extra gruesome. The default paint job is bone skulls with red tongues

This mask will comfortably fit heads up to 25”" in circumference. Please note that everyone’s face is unique, and this mask may not fit your particular face. By default, the mask does not have a slit cut up the back, but one can be added it you like. Personally I am able to put on the mask without the cut, but I’m happy to accommodate your preferences. This mask is slightly oversized and comes with a foam insert glued inside to help align the wearer’s eyes with the vision ports.

There is some slight variation between pieces as they are all hand painted.

Please allow 8 weeks for production of your mask after ordering.

Want a different color or paint job? Or something altogether custom? Please contact me! I’m usually available for custom orders or commissions.

Vision is through the eye webbing of the character. Be aware that vision is very limited. DO NOT DO ANYTHING UNSAFE IN THIS MASK (like driving!) Mask will be shipped with packing material stuffed inside, but may arrive slightly distorted. If needed Mask can be gently heated with a hairdryer from the inside in order to snap it back to its original shape.

While these masks are somewhat durable, they are still an art piece. The paint can be scratched and it may tear if handled carelessly. Please handle with care. Clean with an airduster, or a lightly damp towel. Do not scrub. Store on a mannequin or with padding underneath to prevent distortion.

Do not purchase or handle if you have a latex allergy

Caring for your Latex Mask:

  • Latex is a natural rubber. It will break down eventually, however, if treated properly, this piece will give you years of wear.

  • Handle gently. While I’ve made every attempt to make this piece as sturdy as possible, it will tear if stretched beyond its capabilities

  • Store in a temperature controlled environment away from sunlight. Sunlight will cause latex to yellow and break down faster.

  • Store mask in its proper shape by placing it on a mannequin or with plastic bags inside. If mask becomes deformed, gently heat with a hair dryer on low and reshape into its proper form

  • Mask can be cleaned with a damp, soft towel. Do not use any solvents or cleaners as they may strip the paint. Clean with a light blotting motion. DO NOT SCRUB

  • Dust can be removed with an air duster

  • Mask can be trimmed with a scissors to allow for a better fit or more natural look on the wearer. If trimming, round off any edges. If you need to cut a slit on an overhead mask, use a hole punch at the end of the slit to prevent the mask from tearing.

  • If the paint gets damaged, it can be touched up with Acrylics

Novelty Use Only. Not for use with children.

Pieces will ship in a box with packing material stuffed in the inside of the mask. This should prevent any major deformations. However, you may need to heat up this piece with a hair dryer in order to get it to snap back to its proper shape after shipping. The box size for this mask is to allow the mask to be shipped without folding it. 

Masks are non-returnable, due to their personal nature. Please reach out to me with any questions micah@micahebbe.com

Color:

Do you sometimes need a skull, but like two of them, that are making out? I know how that feels.

This latex mask is cast from my unique sculpture in high quality thick latex and painted to make it extra gruesome. The default paint job is bone skulls with red tongues

This mask will comfortably fit heads up to 25”" in circumference. Please note that everyone’s face is unique, and this mask may not fit your particular face. By default, the mask does not have a slit cut up the back, but one can be added it you like. Personally I am able to put on the mask without the cut, but I’m happy to accommodate your preferences. This mask is slightly oversized and comes with a foam insert glued inside to help align the wearer’s eyes with the vision ports.

There is some slight variation between pieces as they are all hand painted.

Please allow 8 weeks for production of your mask after ordering.

Want a different color or paint job? Or something altogether custom? Please contact me! I’m usually available for custom orders or commissions.

Vision is through the eye webbing of the character. Be aware that vision is very limited. DO NOT DO ANYTHING UNSAFE IN THIS MASK (like driving!) Mask will be shipped with packing material stuffed inside, but may arrive slightly distorted. If needed Mask can be gently heated with a hairdryer from the inside in order to snap it back to its original shape.

While these masks are somewhat durable, they are still an art piece. The paint can be scratched and it may tear if handled carelessly. Please handle with care. Clean with an airduster, or a lightly damp towel. Do not scrub. Store on a mannequin or with padding underneath to prevent distortion.

Do not purchase or handle if you have a latex allergy

Caring for your Latex Mask:

  • Latex is a natural rubber. It will break down eventually, however, if treated properly, this piece will give you years of wear.

  • Handle gently. While I’ve made every attempt to make this piece as sturdy as possible, it will tear if stretched beyond its capabilities

  • Store in a temperature controlled environment away from sunlight. Sunlight will cause latex to yellow and break down faster.

  • Store mask in its proper shape by placing it on a mannequin or with plastic bags inside. If mask becomes deformed, gently heat with a hair dryer on low and reshape into its proper form

  • Mask can be cleaned with a damp, soft towel. Do not use any solvents or cleaners as they may strip the paint. Clean with a light blotting motion. DO NOT SCRUB

  • Dust can be removed with an air duster

  • Mask can be trimmed with a scissors to allow for a better fit or more natural look on the wearer. If trimming, round off any edges. If you need to cut a slit on an overhead mask, use a hole punch at the end of the slit to prevent the mask from tearing.

  • If the paint gets damaged, it can be touched up with Acrylics

Novelty Use Only. Not for use with children.

Pieces will ship in a box with packing material stuffed in the inside of the mask. This should prevent any major deformations. However, you may need to heat up this piece with a hair dryer in order to get it to snap back to its proper shape after shipping. The box size for this mask is to allow the mask to be shipped without folding it. 

Masks are non-returnable, due to their personal nature. Please reach out to me with any questions micah@micahebbe.com