Please read entire listing before purchasing!
This mask is made from Black Lagoon Latex. This is a high quality latex, but it will still trigger a reaction if you are allergic to latex. This mask covers the face and the sides of the head. it is mounted to a black spandex balaclava in order to cover the back of the head. There may be a residual smell from the adhesive used to attach the mask to the balaclava; it will dissipate over time.
Ventilation is through holes in the nostrils. Please let me know if you would like me to cut additional ventilation. The mouth of this mask is sealed and not articulated.
I can make custom painted versions of this sculpture; please email me!
Novelty Use Only. Not for use with children. Caring for your Latex Mask:
Latex is a natural rubber. It will break down eventually, however, if treated properly, this piece will give you years of wear.
Handle gently. While I’ve made every attempt to make this piece as sturdy as possible, it will tear if stretched beyond its capabilities
Tighten elastic carefully. Do not pull excessively, as it may tear the mask.
Store in a temperature controlled environment away from sunlight. Sunlight will cause latex to yellow and break down faster.
Store mask in its proper shape by placing it on a mannequin or with plastic bags inside. If mask becomes deformed, gently heat with a hair dryer on low and reshape into its proper form
Mask can be cleaned with a damp, soft towel. Do not use any solvents or cleaners as they may strip the paint. Clean with a light blotting motion. DO NOT SCRUB
Mask can be trimmed with a scissors to allow for a better fit or more natural look on the wearer. If trimming, round off any edges. If you need to cut a slit on an overhead mask, use a hole punch at the end of the slit to prevent the mask from tearing.
If the paint gets damaged, it can be touched up with Acrylics
Rinse the balaclava with cold water, DO NOT SOAK. Allow to air dry.
Pieces will ship in a box with packing material stuffed in the inside of the mask. This should prevent any major deformations. However, you may need to heat up this piece with a hair dryer in order to get it to snap back to its proper shape after shipping. The box size for this mask is to allow the mask to be shipped without folding it.
Masks are non-returnable, due to their personal nature. Please reach out to me with any questions micah@micahebbe.com
Please read entire listing before purchasing!
This mask is made from Black Lagoon Latex. This is a high quality latex, but it will still trigger a reaction if you are allergic to latex. This mask covers the face and the sides of the head. it is mounted to a black spandex balaclava in order to cover the back of the head. There may be a residual smell from the adhesive used to attach the mask to the balaclava; it will dissipate over time.
Ventilation is through holes in the nostrils. Please let me know if you would like me to cut additional ventilation. The mouth of this mask is sealed and not articulated.
I can make custom painted versions of this sculpture; please email me!
Novelty Use Only. Not for use with children. Caring for your Latex Mask:
Latex is a natural rubber. It will break down eventually, however, if treated properly, this piece will give you years of wear.
Handle gently. While I’ve made every attempt to make this piece as sturdy as possible, it will tear if stretched beyond its capabilities
Tighten elastic carefully. Do not pull excessively, as it may tear the mask.
Store in a temperature controlled environment away from sunlight. Sunlight will cause latex to yellow and break down faster.
Store mask in its proper shape by placing it on a mannequin or with plastic bags inside. If mask becomes deformed, gently heat with a hair dryer on low and reshape into its proper form
Mask can be cleaned with a damp, soft towel. Do not use any solvents or cleaners as they may strip the paint. Clean with a light blotting motion. DO NOT SCRUB
Mask can be trimmed with a scissors to allow for a better fit or more natural look on the wearer. If trimming, round off any edges. If you need to cut a slit on an overhead mask, use a hole punch at the end of the slit to prevent the mask from tearing.
If the paint gets damaged, it can be touched up with Acrylics
Rinse the balaclava with cold water, DO NOT SOAK. Allow to air dry.
Pieces will ship in a box with packing material stuffed in the inside of the mask. This should prevent any major deformations. However, you may need to heat up this piece with a hair dryer in order to get it to snap back to its proper shape after shipping. The box size for this mask is to allow the mask to be shipped without folding it.
Masks are non-returnable, due to their personal nature. Please reach out to me with any questions micah@micahebbe.com
